Společný problém

Yes. For your good shopping experience, we will provide you with free proofing service, there are technical staff to provide you with professional proofing service, and professional staff to receive follow-up throughout the process. You can also post the materials/samples you need to process to us, after the proofing effect reaches your satisfaction, then continue […]

This depends on your location, the location of delivery and arrival, the specifications of your goods, and the shipping method you choose. For most machines, the shipping cost is very low, and some models will have free shipping.

The guide rail should be cleaned and lubricated frequently, and the motor must be cleaned and lubricated frequently, to ensure that the machine can move better during cutting, more accurate cutting, and the quality of the cut products will improve . Otherwise, if there is a problem in the operation, it may hurt people, and

CO2 laser cutting machine, with high power, can cut metal and non-metal materials, as well as highly reflective materials, metal materials, can cut 25mm stainless steel, carbon steel, etc. Non-metallic materials can cut acrylic, wood materials, PVC and other materials, the thickness can reach 60mm, high reflective materials, can cut 4mm aluminum plate, CO2 laser

 Cutting technology is widely used in the processing of metal and non-metal materials, which can greatly reduce the processing time, reduce the processing cost, and improve the quality of the workpiece. Laser cutting is achieved by applying high power density energy generated by laser focusing. Compared with traditional sheet metal processing methods, laser cutting has

Generally, in the application of laser cutting machines, auxiliary gas is required for material cutting. The problem mainly involves the type and pressure of auxiliary gas. Generally, the auxiliary gas can not only assist the cutting quality, the auxiliary gas is ejected coaxially with the laser beam, to protect the lens from contamination and blow

It is the most basic requirement to understand the situation of the company’s cutting equipment system settings, the role of each system, and the process effect to be achieved. The operator of the laser cutting machine needs systematic training before taking the job, because the operator needs to make a quick judgment when the laser

1. First of all, we must figure out the production scope, processing materials and cutting thickness of our company, so as to determine the type, size and quantity of equipment to be purchased, and make a simple foundation for the later procurement work. The application field of laser cutting machine involves many industries such as

For lasers with continuous wave output, the laser power and mode are both important for cutting. In actual operation, the maximum power is often set to obtain a higher cutting speed, or to cut thicker materials. However, the beam mode (the distribution of beam energy in the cross-section) is sometimes more important, and when the

1. The quality of the laser beam deteriorates. The quality of the laser directly determines the quality of the laser beam. Generally speaking, end pump semiconductor lasers, CO2 metal radio frequency tube lasers, CO2 glass tube lasers, and fiber lasers. The above-mentioned beam quality can only be sent back to the manufacturer of the laser