【Laserschneidmaschine】Einige Aspekte, die Aufmerksamkeit erfordern

          The daily maintenance and maintenance of the laser cutting machine is very important, because the price of the laser cutting machine is not low, ranging from hundreds of thousands to millions, so as long as possible to extend the life of the laser cutting machine to better save production Cost, to win greater benefits. Which specific aspects should be maintained from the following aspects:

        1.Replacement of circulating water and cleaning of water tank. Before the machine works, make sure that the laser tube is filled with circulating water. The water quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. This is best done once a week.　

       2. the fan is clean. Long-term use of the fan in the machine will cause a lot of solid dust to accumulate in the fan, which will cause a lot of noise in the fan, and it is not conducive to exhaust and deodorization. When the suction of the fan is insufficient and the smoke is not smooth, the fan must be cleaned.　

        3. Clean the lens. There will be some mirrors and focusing mirrors on the machine. Laser light is emitted from the laser head after being reflected and focused by these lenses. The lens is easy to get dust or other contaminants, causing laser wear or lens damage. So clean the lens every day. When cleaning, pay attention to: 1. The lens should be gently wiped, not to damage the surface coating; 2. The wiping process should be handled gently to prevent falling; 3. When the focusing lens is installed, be sure to keep the concave side down.

        4. Clean the guide rail. The guide rail and linear axis are one of the core components of the equipment, and its function is to guide and support. In order to ensure that the machine has higher processing accuracy, its guide rails and straight lines are required to have higher guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the processed parts. These smoke and dust will be deposited on the surface of the guide rail and linear axis for a long time, which will have a great impact on the processing accuracy of the equipment and will The formation of corrosion points on the surface of the linear axis of the guide rail shortens the service life of the equipment. So clean the machine rails every half a month. Turn off the machine before cleaning.　

        5. Fastening of screws and couplings. After the motion system has been working for a period of time, the screws and couplings at the motion connection will be loose, which will affect the stability of the mechanical movement. Therefore, during the operation of the machine, observe whether there are abnormal noises or abnormal phenomena in the transmission components. Sturdy and maintenance. At the same time, the machine should tighten the screws one by one with a tool after a while. The first sturdiness should be about a month after the device is used.　

        6. Inspection of optical path. The optical path system of the machine is completed by the reflection of the mirror and the focusing of the focusing mirror. There is no offset problem of the focusing mirror in the optical path, but the three mirrors are fixed by the mechanical part, and the possibility of offset is greater. Although the deviation does not occur under normal circumstances, it is recommended that the user should check whether the optical path is normal before each work.[/vc_column_text][/vc_column][/vc_row]