The first method: Since the light spot is the smallest at the focal point of the laser cutting machine, press the “Spot” key to determine the focal length according to the size of the light spot. That is, when the light spot is the smallest, it can be regarded as the optimal height of the laser head when cutting the object. Put an object under the laser head and adjust the height of the laser head. When the laser head is at a different height, press the “Spot” button to observe the size of the light spot. You can adjust the position of the laser head to find out The area of the laser head with a small light spot, and then finely adjust the height of the laser head in this area. When the light spot is the smallest, it can be regarded as the position of the laser head we want to adjust.
The second method: Since the light intensity is the strongest at the laser focal length of the laser engraving machine, the position of the focal length is determined according to the depth of the laser on the object during self-test. Put an object under the laser head and adjust the height of the laser head. When the laser head is at a different height, press and hold the “positioning” key for more than 3 seconds. Good height. That is, the height of the laser head we want to adjust.
I am genuinely delighted to read this web site posts which includes lots of valuable facts, thanks
for providing such data.
Simply desire to say your article is as amazing. The
clearness on your put up is just excellent and that i could think you’re
a professional on this subject. Fine along with your permission allow me to grasp your feed to stay up to date with forthcoming post.
Thank you one million and please continue the gratifying work.
Howdy great website! Does running a blog similar to this take
a massive amount work? I’ve absolutely no expertise in computer programming however I had been hoping to start my own blog in the
near future. Anyway, should you have any recommendations or tips for new blog owners please share.
I know this is off subject but I just had to ask. Thanks a
lot!
Hi there to all, for the reason that I am actually keen of reading this weblog’s post to
be updated regularly. It contains pleasant stuff.