Советы по использованию машины лазерной резки

The guide rail should be cleaned and lubricated frequently, and the motor must be cleaned and lubricated frequently, to ensure that the machine can move better during cutting, more accurate cutting, and the quality of the cut products will improve . Otherwise, if there is a problem in the operation, it may hurt people, and the seriousness may lead to the death of the staff. Of course, now Kingway is equipped with independent dust control cabinets for many models, which can effectively isolate dust.

The guide rails of the laser cutting machine should be cleaned frequently to eliminate dust and other debris, to ensure that the equipment racks are often wiped, and lubricating oil is added to ensure lubrication without debris. Now that laser cutting machine has entered our daily life, it has become an indispensable weapon in the field of sheet metal processing, but according to our understanding of the actual use of customers, we have found that many customers have used the machine. Unfamiliar situation.

Today we will reveal the tips you should pay attention to when using laser cutting equipment:

1. The dual focal length laser cutting head is a fragile item on the laser cutting machine, which may cause damage during long-term use, so the laser cutting head should be inspected on schedule

2. Every six months, the track of the laser cutting machine needs to be tested, and the straightness of the track and the verticality of the machine must be re-measured. If the straightness and verticality of the track and the machine appear during use The problem will affect the accuracy of the cutting, so this is a must and it also directly affects the cutting effect. The steel belt looks like a small thing, and the problem is still a bit serious.

3. Every week, you need to use a vacuum cleaner to clean the machine, remove dust, and protect electronic circuits and components.

4. Check the steel belt of the machine frequently to ensure the tension.